There are drawbacks in winter decoration. I'll tea

2022-07-22
  • Detail

It seems that winter is coming, but many people feel that winter is not suitable for decoration. Indeed, compared with other seasons, winter does have many inconveniences, such as weather, such as the new year and other factors that need to stop work, but in fact, as long as the disadvantages of winter decoration are reasonably solved during decoration, I will tidy up for you today

winter is coming, but many people feel that winter is not suitable for decoration. Indeed, compared with other seasons, winter does have many inconveniences, such as the weather, such as the new year and other factors that need to stop work, but in fact, as long as the disadvantages of winter decoration are reasonably solved during decoration, I will tidy up for you today

first, improper seam retention

when decorating in winter, the seam of doors and windows should not be too small, so as to avoid tightening and lax closing after hot inflation in summer. When laying solid wood floors, an expansion joint of about 2mm should be left around. When making furniture, an interface joint of about 0.1mm should also be left. The joint between the floor and the wall should be formed into a transition with floor battens, which can better deal with the problem of excessive gap between the wall and the floor

second, ceramic tiles fall off

in winter decoration, floor tiles and ceramic tiles should be soaked in water before paving, and the moisture must be saturated. Only in this way, the bonding with cement will not be weak due to slurry absorption, resulting in hollowing and falling off

in addition, whether wall tiles or floor tiles, they need to be moved from outdoor to indoor for 24 hours before being paved when they adapt to the indoor temperature, so as to avoid hollowing and falling off after construction. After the bricks are paved, the joints should be pointed in time

Third, wood deformation

the main materials used in decoration, especially wood, need to be placed in the room with heating equipment for 3-5 days to volatilize the moisture formed due to temperature changes. This is to make the moisture content of wood close to the level of the house, which can avoid wood deformation after decoration

fourth, gypsum line cracking

when carrying out gypsum board ceiling operation, the moisture content of the wooden keel must be controlled below 12%, and the keel must be firm, and there must be no looseness, so as to prevent gypsum board ceiling cracks. The joints between gypsum boards and between gypsum boards and walls shall be left with a gap of about 0.5cm, which shall be mixed and filled with gypsum powder and latex, and then double pasted with kraft paper, and then applied with putty to prevent the gypsum line from cracking

fifth, poor paint effect

in winter decoration, if there is a strong wind and cooling weather, it is not suitable to carry out oil work, because the wind and sand in winter are large, and it is easy to attach dust when the paint and paint are not dry. Attention should be paid to selecting a windless weather for painting, so as to ensure that the ambient temperature of paint application is not less than 5 degrees Celsius, and the ambient temperature of varnish application is not less than 8 degrees Celsius, which should be applied strictly in accordance with the temperature in the product description. To prevent sand from falling on the paint surface, close the doors and windows tightly

sixth, the decorative panel cracks

after the decorative panel is transported to the construction site, the floating dust shall be wiped off with a dry towel, and the back cover shall be painted with varnish for two consecutive times. All decorative panels should be placed flat, with a large core board at the bottom and a large core board pressed on top. They cannot be placed upright, so as to prevent the panel from cracking and warping

seventh, wall cracking

in winter decoration, paint is applied before the putty is completely dry, and the wall is easy to “ Sweating ” There is even a large area of cracking. The window is often opened for ventilation. The best time is between 10 a.m. and 4 p.m. The temperature is relatively high during this period, which can prevent the new putty from freezing. After the first putty is completely dry, apply the second putty. After the second putty is completely dry, polish it carefully with sandpaper

warm tips: for more practical decoration knowledge and follow-up photos of real scenes on the construction site, please pay attention to your palm (wechat: mall_jia)

合肥不孕不育医院

济南精神医院

南昌男科医院

河北肝病医院

Copyright © 2011 JIN SHI